Roof Tile Paint Central Coast & Newcastle

Premcoat Primer 20 Ltr

Premcoat primers are clear acrylic primers that are designed to bind and penetrate oxidised tiles before applying top coat.

Premcoat Sealer

Premcoat sealers are designed to seal porous concrete roof tiles before finishing it off with a topcoat.

Premcoat Roof Coating 20 Ltr

Premcoat roof coats are 100% acrylic gloss coats that are designed to resurface metal roof surfaces and concrete roof tiles.

Premcoat+

Premcoat+ are glossy roof topcoats used for resurfacing metal and concrete roof surfaces.

Premcoat sealers are designed to seal in colour and fill severely pitted and porous surfaces before applying topcoats.

Premflex Flexible Pointing

Our Premflex flexible pointing supplies come in a wide range of colours that will suit different client tastes and preferences.

Deo prime

A clear acrylic sealer with added adhesion protection designed for previously painted substrates where there is residual paint left on the substrate, this will hold down any loose edges.

A Pure acrylic blend formulated with anti-corrosion properties, rust inhibitors and added adhesion properties, this is perfect for use as a sealer on metal roof surfaces where there is surface rust across the substrate, resisting bleed through on top coats.

Flexitech

Flexipoint is a pre-mixed, pre-coloured, trowel applied, flexible pointing compound that is used to verge point the ridge caps of cement & terracotta roof tiles.

GLOBALCOTE RANGE

The Globalcote range is 100% acrylic, low VOC, environmentally friendly, waterproof, dirt repellent, tough, durable and highly flexible, allowing it to withstand elements of weathering. The Globalcote waterproof membrane range is made up of Elastacote, our standard coating and Infracote, infrared reflective coating.

Globalcote’s Hot Weather Additive is specially formulated to retard the drying of acrylic (water-based) coatings. It is designed to extend the ‘wet edge’ of your paint and improve the spray pattern adding that professional look to your application.

Shieldseal CT401

Shieldseal CT401 incorporates Shieldcoat’s new fade resistant technology. Specific ingredients have been chosen for their ability to repel the calcium salts that leech from the tile causing premature colour fading, so not only does CT401 help your top coats stick, it also helps them last longer.

Shieldseal GTP - Primer for Glazed and Unglazed Terraccota tiles

Shieldseal GTP is a revolutionary water-based primer, providing guaranteed adhesion to glazed and un-glazed terracotta roof tiles. Formulated using state of the art adhesion promoters, Shieldseal GTP is the most advanced undercoat on the market. Once fully cured, Shieldseal GTP forms such a strong bond with the tile surface, that it cannot be scratched off. When used as part of Shieldcoat’s Nanoprotect coating system, Shieldseal GTP is covered by a 12 year manufacturers warranty.

Shieldcoat’s Roofbond coating systems are manufactured to withstand Australia’s unique and demanding climate, using an all acrylic binder specifically recommended for roof refurbishment applications. Shieldcoat has chosen the best resin available on the market for this product. The criteria for Shieldcoat’s choice is based on the resin’s characteristics including durability, wet adhesion properties, gloss retention, low dirt pick up, low water sensitivity and through dry capabilities.

Shieldseal W Plus

Shieldseal W Plus is a waterbased primer used on metal roofs including colorbond to provide an interface between the substrate and the Roofbond Roof membrane. It is normally sprayed through an airless as a milky white liquid and it dries clear. If the surface is likely to rust or white rust, Rustshield W should be used instead.

Rustshield W

Rustshield W Is a state of the art water based acrylic anti-rust sealer/primer for use on all metal roof substrates. It provides an excellent interface for either the Roofbond Roof Membrane or Thermobond HRC. Rustshield W has many advantages when compared to solvent based anti-rust primers and traditional spot treating methods, and It’s superior performance has been proven time and time again since its introduction more than 12 years ago.

Thermobond has been used as a solution for electricity cost and heat reduction throughout Australia and the world. Significant interior temperature reduction is achieved on anything from piggeries/chicken sheds to shipping containers and even silos. Thermobond can be applied to anything that would benefit from a reduction in temperatures as a result of direct sunlight.

Thermobond operates on three levels, solar reflectivity, very high heat emissivity and membrane thickness. This means Thermobond does not allow the passage of heat from the sun to reach the substrate it has been installed on.

Globlacote CONCRETE SEALER

Our Concrete Sealer is a solvent-based acrylic concrete coating. It is a hard, but highly durable coating that is suitable for a variety of concrete substrates. Concrete Sealer can be brushed, rolled or sprayed on concrete driveways and paths including stamped, pattern pave or stencilled surfaces; and factory or workshop floors. Available in 21 contemporary colours, it provides a protective, coloured coating to help protect the substrate from weathering, dirt, and grime.